Assembly instructions

Assembly instructions

Positioning the nets

1. Keep the net rolled up, find the end, and start unrolling it,

2. Drive the posts into the ground by pushing the iron tip into the soil with your hand as close to the tip as possible,

3. Stretch the net tightly,

4. Carefully secure the net and connect the clamp to the cable Ref. 59L and to the energizer,

5. Remember to plant the ground rod Ref. T1.

Setting up the BADI FARM fencing system is quick and easy

One kilometer of tape can be installed in about 30 minutes. Just start by placing components like the corner insulators and tensioners at the ends and corners, and then naturally continue with the insulators on the posts or the fiberglass posts with pre-installed insulators.

STEP 1

Attach the tape to the buckle of the tensioner Ref. 44V.
Pass the tape through it.

STEP 2

Secure it with the prong.

STEP 3

Tension the tape.

STEP 4

To lock it, pass it through again.

STEP 5

Secure the excess tape with the handy clip. Unroll the tape to the next tensioner, pull the tape smoothly, and secure it in the second buckle.

STEP 6

Now you need to pass it through the insulator: open the insulator.

STEP 7

Insert the tape.

STEP 8

Screw it tight.

No products available yet

Stay tuned! More products will be shown here as they are added.