Dual Action Tension Sensor (DATS2)
The patented Nemtek Dual Action Tension Sensor DATS2 can detect a change of tension in the fence wire. It uses the electric fence monitoring circuit to create an alarm condition on the energizer. The dual action increases the likelihood of an intruder being detected and reduces the possibility of tampering. There are two models available to cater for different wire types; the TS-DATS2/XL is used with the galvanised and aluminium fence wires and the TS-DATS2/SS for the stainless steel wires. Detection range (straight line) up to 50m.
Pagamenti sicuri
Pagamento sicuro e protetto.
Spedizione
Spedizione rapida e tracciata.
Resi
Reso facile entro 30 giorni.
Features:
- Is paired up with the Hybrid Compression Spring CNT2HB. This is so that the tension in the fence wires can be adequately maintained
- Detects a change in tension on a fence line
- Detects an open circuit at its first-stage trigger
- Detects a dead short at its second-stage trigger
- Constructed from robust material to suit all wire types up to 1.6mm
- Easy to install and retrofit onto most existing Nemtek electric fences
NMT-1943
Commenti (0)
Ancora nessuna recensione da parte degli utenti.
16 altri prodotti della stessa categoria:
The patented Nemtek Dual Action Tension Sensor DATS2 can detect a change of tension in the fence wire. It uses the electric fence monitoring circuit to create an alarm condition on the energizer. The dual action increases the likelihood of an intruder being detected and reduces the possibility of tampering. There are two models available to cater for different wire types; the TS-DATS2/XL is used with the galvanised and aluminium fence wires and the TS-DATS2/SS for the stainless steel wires. Detection range (straight line) up to 50m.